Treo Shortcuts

What's in the package

2calllog.prc:	Jump directly into the Treo Call History view (freeware).
2contacts.prc:	Jump directly into the Treo Contacts view (freeware).
2dialpad.prc:	Jump directly into the Treo Dialpad view (freeware).
2favourites.prc:	Jump directly into the Treo Favourites view (freeware).
2phone.prc:	Have the Phone (leftmost) button loop Phone app views and other applications (see below).
2web.prc:	Have the Power/Web (rightmost) button loop Blazer Main & Bookmarks pages, and other applications (see below).

---

2Phone

The 2Phone application lets you define 1-5 applications (or views from the built-in "Phone" app) to loop through with presses on the Phone (leftmost) hardware button.

Configuration

When you first launch this application, the configuration screen is displayed:



Check the first option to activate this app (take over the Phone button).

Then you can select up to five items to loop through with each press of that button.

You can select any of the following built-in "Phone" application views:
"Main", "Favourites", "Dialpad", "Contacts", "History", "Active calls".

Or any of the following actions:
- Lock & turn off.
- Go to "Network prefs.".
- Launch TAKEphONE.
- Launch an external application.

In addition, you can select a view/action for a long press
(press & HOLD) of the button.
You can select any of the above items, plus beam business-card.

If you select a timeout, then if you do not press the button for the selected time, next press will start the loop from start.

Note: To read on how to configure the application AFTER it is activated - read in the
"Operation" section below.

Operation

Once the application is activated, press the button shortly to loop through the items you selected.

If you press & HOLD the button, you will see a splash screen displayed:



Keep holding the button down to execute the item selected for a long press (e.g. - beam business-card).

To configure the application - tap the "Tap here to configure" button while holding the button down !

---

2Web

The 2Web application lets you define 1-4 items to loop through with presses on the Power/Web (rightmost) hardware button.

Configuration

When you first launch this application, the configuration screen is displayed:



Check the first option to activate this app (take over the Power/Web button).

Then you can select up to four items to loop through with each press of that button.

You can select to loop through the built-in "Blazer" browser "Main" and "Bookmarks" views,
or any of the following actions:
- Lock & turn off.
- Go to "Network prefs.".
- Power the device Off.
- Launch an external application.

In addition, you can select a view/action for a long press
(press & HOLD) of the button.
You can select any of the above items, plus beam business-card.

If you select a timeout, then if you do not press the button for the selected time, next press will start the loop from start.

Note: To read on how to configure the application AFTER it is activated - read in the
"Operation" section below.

Operation

Once the application is activated, press the button shortly to loop through the items you selected.

If you press & HOLD the button, you will see a splash screen displayed:



Keep holding the button down to execute the item selected for a long press (e.g. - Turn off & lock).

To configure the application - tap the "Tap here to configure" button while holding the button down !


Thank you for choosing "Treo shortcuts" !!!